China Fiber Optic Jumper manufacturers Module optical fiber connections to the torsion of the sequence Can provide data center and SAN System, simple and flexible MPO trunk connector fixed on the back of module The standard 19" can be installed on any cabinet Convenient to be installed, moved and added Main Application Data center rack mount patch panel Connection between trunk cables to patch cords Pre-Terminated System Installation In order to ensure entire connection is in a unify condition, we need to first install patch panel, cassette module and Related mounting hardware. Then, say the cables in designed cable passage position, remove all the protection caps and wraps, Connect MPO and to all the related MPO sockets, mount and secure the cables with cable ties, simple as that. Installation Steps 1. Install accessories and hardware 2. Cable laying 3. Plug device 4. Cable mounting Specification Multi ModeSingle Mode ILMPOSingle max: 0.35db (L) Single Max: 0.60db (G)Single max: 0.35db(L) Single max: 0.75db (G) LCMAX: 0.10dB (L) MAX: 0.15 db (G)Max: 0.30db RLMPO>20dB>60dB (8 degree Angle Polish/APC) LC>30db>50 db (UPC) >60DB (APC) Mechanical MPO<0.2dB, 200 times insertion LC<0.2db, 500times insertion EnvironmentWorking Temp-20~ +60 鈩?/p> Storage Temp-40~ + 70 鈩?/p> Install Temp-5~ + 50 鈩?/p> Enterprise Honor Our Company Our Factory Our ServicesChina Fiber Optic Jumper manufacturers website:http://www.fcjcable.com/fiber-optic-jumper/