KerbalX

Details

• Type: SPH
• Class: aircraft
• Part Count: 120
• Pure Stock

QWEASD:Control

Throttle:Collective pitch of main rotor(take off at about 35%)

AG1:Spinup/down engine

AG2:Disable collective pitch to set pitch to 0 degree / re-enable (Should disable in cruise mode)

J:Hold to transform to cruise mode
L:Hold to transform to helicopter mode

I/K:Ducted fan blade pitch(Should keep minimum in helicopter mode)

Flight instruction
Before flight:
Make sure advanced tweaks is enabled in KSP settings.

Take off:
Hold L key until ducted fan points sideway completely.(If I set helicopter mode as default, engine can’t spin at first)
Engage SAS.(It can hold yaw direction)
Set throttle to around 35%.
Press AG1 to spinup engine, the craft starts to float.

Transform to cruise mode:
Gain some speed(20m/s~) in helicopter mode.
Press I for short time then hold J until ducted fan points foward completely.
Press I to accelerate, at the same time press AG2 to remove main rotor collectice pitch.
When main rotor stops automaticaly and come to static position, transforamtion is complete.

Transform to helicopter mode:
Hold K to remove ducted fan blade pitch, then hold L until ducted fan points sideway completely.
Press AG2 to re-enable main rotor collective pitch.