KerbalX

Description

A stock aircraft called Beech BV2. Built in the SPH in KSP version 1.3.1, with 27 of the finest parts, its root part is nacelleBody.

The Beech BV2 is more of an attempt at a replica, and twice the Beech B V, in several ways. It seats six instead of three, performs better, and more closely follows the typical lines of the original it is inspired on.
.

Usage Notes

• Board by climbing on the trailing edge of the wing close to the fuselage, then walk up right to the leading edge until you get the boarding prompt. No need to grab the hatch.
• The two cockpits are slightly angled inwards to blend better, which skews their control orientation. Make sure to hit AG3 to reset control orientation to the probe code clipped at the base of the tail, to ensure proper navball operation. Or don’t, if you wish to experience a bit of fake single-prop P-factor.
• KSP fills the starboard cockpit first by default. Since the hatch is on the port side (inverse of the original), that is the correct place for the pilot. If you’d rather the pilot sit port-side next to the hatch, move manually before launch.

Details

• Type: SPH
• Class: aircraft
• Part Count: 27
• Pure Stock
• KSP: 1.3.1

Mods

• Squad (stock)