KerbalX

Description

Control of the thrust of the boosters and their separation is carried out automatically using the KAL-1000 Controller.

Preparing to start:
[T] - activation of SAS
[1] - activation of fuel cells, blocking of elevons and tail steering
[Z] - ignition preparation
[9] - ignition of engines

[0] - Lift off and start of controllers

[2] - separation of the boosters 1,2
[3] - separation of the boosters 3,4
[4] - separation of the main lifter and turn on orbital engines
[5] - toggle cargo bay
[6] - toggle airbrake
[7] - activation of elevons and tail steering
[8] - brake of wheels and brake parachute

Built in the VAB in KSP version 1.12.2.

Control of the thrust of the boosters and their separation is carried out automatically using the KAL-1000 Controller.
When reaching an altitude of 3000 m, switch the SAS to the prograde orientation mode relative to the surface.
After separating the boosters, switch the SAS to the prograde relative to the orbit and reduce the thrust to 70%.
Further, to achieve a more or less realistic trajectory and engine operation scheme, the thrust control system of the main engines may differ depending on the selected orbit, but in any case not more than 70%.
When the apogee is reached, the ship must reach an orbital speed.

Details

• Type: VAB
• Class: spaceplane
• Part Count: 324
• Pure Stock
• KSP: 1.12.2

FlagsPack

Air Brake

it’s not replica

here is my STS Kerbin Space Shuttle