KerbalX

Details

• Type: VAB
• Class: lifter
• Part Count: 388
• Pure Stock

Description

This is my falcon 9 replica. Fully reusable as you can see on the video.

ATTENTION

THIS VESSEL REQUIRES RESTOCK FOR THE ENGINES LOOK RIGHT

Flight Instructions

1) Gravity Turn:
Must reach 45degrees halfway trough the atmosphere indicator, otherwise the fuel wont be enough to realize the boostback burn.

2) Boost Back
Once the Fuel Tanks on the 1st stage are empty toggle RCS, deploy the 2nd stage and unlock one of the middle fuel tanks. Once you’ve done that, pitch up until you’re heading back to the ksc, press 3 to enter the boostback engine config and burn until you empty the fuel tank

3)Landing Descent
Once you’ve realized the boostback burn click the retrograde icon on the SAS options and toggle the brakes. Press 4 to enter landing engine config and 1 to unlock the landing legs. Reach for the bottom hinge and the piston just like in the video, pin their menus and disable the piston autostrut. This will be important later.

4)Landing
Start burning at 3100m - 2900m(relative to terrain), deploy landing legs when you reach 130m/s - 100m/s once they’re fully deployed, toggle the piston autostrut to heaviest part while spamming 2 (landing leg lock) and the lock option on the bottom hinge until locked. Keep controlling the throttle for a soft touchdown (0m/s - 5m/s)

CONGRATULATIONS!! you’ve just successfully landed a falcon 9!!

Mods

ReShade
Trajectories
Editor Extentions Redux
Kerbal Engineer Redux
ReStock
Hangar Extender
Making History DLC
Breaking Ground DLC