KerbalEncabulator 1.1
by quitessa
uploaded 2017-08-26
stock ship


  • Type: SPH
  • Class: ship
  • Part Count: 49
  • Pure Stock


For a number of months now, work has been proceeding in order to bring perfection to the crudely conceived idea of a drive that would not only supply inverse reactive force for use in unilateral de-orbital phases , but would also be capable of automatically re-synchronizing conical gravimetrics. Such an instrument is the Kerbal-Encabulator.

Now basically the only new principle involved is that instead of power being generated by the relative motion of exotherms and particulates, it is produced by the modial interaction of compressive-reluctance and expansive diractance.

The original machine had a drive plate of pre-famulated panelite surmounted by non-malleable logarithmic cubic-octags in such a way that the tessa main bearing was in a direct line with the pandimensional flux. The latter consisted simply of six hydrophobic landervanes, so fitted to the twofaced joolian eeloshaft that side fumbling was precicely inverted.

The main winding was of the normal Zaltonic-o-kerbodyne type placed in Probodobodynic semi-boloid slots of the stator, every seventh conductor being connected by a non-reversible tremie pipe to the differential girdle spring on the up end of the gravimetrics.

The Kerbal-encabulator has now reached a high level of development, and it’s being successfully used in the operation of transdunan decelleration. Moreover, whenever a forescent skor motion is required, it may also be employed in conjunction with a drawn reciprocation kraken arm, to reduce sinusoidal repleneration.

A Krakendrive called KerbalEncabulator 1.1. Built with 49 of the finest parts, its root part is probeStackSmall. This is based on the technology designed by Smaster7772

Built in the SPH in KSP version 1.3.0.

swipe to switch images, tap to close