KSA PaperSpacePlane (Monev44 edition)
by monev44
uploaded 2015-03-17
(updated 2015-03-17)
76 downloads /
2
points
SPH
stock spaceplane
#Plane #stock #KSA #spaceplane #monev
click to edit

click to edit

click to edit

click to edit

Description

The KSA PaperSpacePlane with and added air-breathing jet booster to get it high enought in the air so the ion plane can make it into orbit

No action groups. Just stage your way through. Be very careful with the jet throttle. You don’t need much. Start at 33% Throttle and Increase slowly as you clime. ~50% at ~12km and full by ~25km

The tail drags on take off. It’ll be fine, just turn on SAS and don’t touch the controls till it takes off on its own

The goal is to get above 2100m/s and 45km with the jet, the Ion can make it from there. It’s tricky, you don’t want to clime too slow and run out of jet fuel too deep in the atmosphere, and you don’t want to clime too fast and run out of air before you use all your fuel and gained all the velocity you need.

A stock aircraft called KSA PaperSpacePlane (Monev44 edition). Built with 96 of the finest parts, its root part is strutCube.

Built in the SPH in KSP version 0.90.0.

click to edit

Details

  • Type: SPH
  • Class: spaceplane
  • Part Count: 96
  • Stock:
click to edit

click to edit

click to edit

click to edit

click to edit

click to edit

swipe to switch images, tap to close
K
S
P