Apollo Saturn V Replica
by Yukon0009
uploaded 2020-12-16
stock ship
#saturnv #stock #apollo #replica


Saturn V ascent
1. Stage to activate main engines, then slowly throttle up: do NOT hit full throttle.
2. Fly straight up to 2000m 
3. Slowly start your gravity turn, do NOT make large control inputs
4. Don’t be alarmed when there are sudden spikes of lag during stage separation
5. Ignite Stage 2 engines after the sepatrons burn out

Unbreakable joints and infinite heat tolerance is recommended for ascent

Transposition and docking
1. Stage the fairing
2. Make sure you don’t decouple the wrong part (check the staging, I’m not sure if its right)
3. Perform the usual docking stuff

1. Enter low (~10km) munar orbit
2. Zoom your camera into the CM, the three kerbals are housed in chairs, EVA them across to LM
3. Zoom camera into the back of the LM, you should be able to see the chairs in there
4. Munar landing: do not spend fuel loitering, it does not have the fuel margins to do so
5. After surface operations, set throttle of the LM descent engine to 0, hold SAS radial out
6. Stage and separate ascent module, initiate gravity turn higher than with normal mun missions
7. Rendesvous and dock with CSM: you may have to switch to the CSM if the ascent module runs out of fuel

Returning to Kerbin should be straightforwards enough, not going to bother writing instructions here
God help you if you actually download and fly this thing
Recommend you launch from SPH instead of VAB

Flags https://drive.google.com/file/d/11B2CezcTwUmljhTenisCcZajtXnilAgI/view?usp=sharing


  • Type: SPH
  • Class: ship
  • Part Count: 2577
  • Pure Stock
  • KSP: 1.10.1
swipe to switch images, tap to close