Paste a url where
can be downloaded
- Type: SPH
- Class: spaceplane
- Part Count: 71
- Pure Stock
Since KSP v1.1, Squad decided to ‘fix’ the attachment rules of Mk2 fuselages. This has led to some unexpected/inconsistent/buggy behaviour when rotating Mk2 fuel parts, so you may find that some of these parts are flipped over (aesthetics issue only). If this bugs you, please send me a pm for the pre-1.1 part configs and message Squad about a fix :). There’s a topic about it on the forums here.
Stock SSTO spaceplane 2-seater with cargo, passenger and fuel variants. Change variants by detaching the docking port, deleting the cargo bay and inserting the preferred modules before re-attaching the docking port. Make sure the craft is controlled from the
Mk2 Drone Core. Built in the SPH in KSP version 1.3.1 by Yakuzi.
 Toggle RAPIER engines
 Switch RAPIER mode
 Toggle air brakes
 Toggle cargo bay
 Toggle antenna
 Toggle docking bay
Auto liftoff at 120 m/s, set and forget attitude of 10 degrees.
When starting to lose speed at ~1450 m/s, press
2to switch to closed cycle mode
Burn to desired apoapsis (tested <=100 km LKO), set SAS to
Circularise at ~apoapsis
Burn retrograde until periapsis of 30-35 km
2to switch to air-breathing mode, level wings and set SAS to
At 70 km, set SAS to
stability assist, keep attitude between 30-40 degrees
At 1200 m/s (Surface), set SAS to
stability assistat prograde
Adopt a glide angle of -15 to -20 degrees
Approach runway at ~80 m/s, flare and touch down
Nova (left) and Super Nova (right) variants
Do you really want to downvote this?
It will cost you 5 of your own points to downvote