KerbalX

Description

Chang e 5 is The third of three steps in the Chinese lunar exploration project. Its mission is Sampling from the Moon，just like Lunar 16. I’ve try my best to make it.
How to fly it
Launch
1.Keep the full throttle at all times.
2.After reaching a speed of 60m/s, start the program turning.
3.After a few seconds for the first stage separation,you can start the second engine.
Landing
If you feel that the thrust is not enough, you can cancel the thrust limit of the lander’s first stage rocket engine.
Docking
1.Detachable orbital module adapter (consisting of a large cooling plate).Then, you can see the docking port of the orbital module.
2.Re-enable RCS fuel (They are behind the Lander’s RCS thrusters )
3.There’s a little adapter that’s made up of eight basic fins and there’s a white command module behind it, and you can see there’s a little black stuff on the side, and that’s the storage tanks. As for the tanks on the lander you can see it through the gaps.
4.After the sample is sent from the lander to the orbital module, the docking port is directly separated (note: not the docking separation, is directly thrown away the docking interface! There is a small splitter behind the adapter and the adapter can separates the adapter and docking port.)
Reentry
Lift the capsule up a little bit during the re-entry into the atmosphere，then just wait and shoot out parachute.
Have Fun!
Hope you will like it.
P.S. I’m a Chinese student (grade 9 ) so you can find the expression in the introduction is not very good place, please forgive!
A stock rocket called Chang e 5. Built with 223 of the finest parts, its root part is probeStackSmall.

Built in the VAB in KSP version 1.9.1.

Details

• Type: VAB
• Class: lander
• Part Count: 223
• Pure Stock
• KSP: 1.9.1