Paste a url where
this mod
can be downloaded
Details
- Type: VAB
- Class: ship
- Part Count: 122
- Pure Stock
ECO-1 Block 10 (Payload 3,5 tons) (Reusable Lifter)
2 Stage reusable (Jet+Ion) lifter with a payload of 3,5 tons to a 100 km orbit around Kerbin.
Vehicle ISP above 3200
Fuel consuption: 1,9 tons of fuel per ton of Payload
Almost 10 times less fuel consumption than a traditional rocket
Improvements over the previous prototype (SSTO Payload 1t):
https://kerbalx.com/The_Nico/SSTO-Jet+Ion-Prototype-Payload-1t
Fuel consumption reduced by 20%
Payload increased by 350%
|
ECO-1 Block 10 Flight Manual (WIP)
1) Press “T” to activate Stability Assist “SAS” and press “Z” for full throttle. Then spacebar to launch.
2) Rotate the vehicle to the horizontal and accelerate up to 500 m/s
3) Rotate to an angle of 25°-35° (WIP)
4) At 20 km activate FIRST the Fuel Cells with 7
and then the Ion engines.
5) When the Rapiers run out of air, press spacebar for stage separation.
6) At 60 km the fairing can be jettison.
7) Keep accelerating until the first stage reenters the atmosphere and reached an altitude between 35-30km (can be pushed a bit more). At this point you have to cut throttle and switch vessels before stage 1 gets destroyed. (WIP)
8) Let the 1st stage fall until you reach safe parachute deployment velocity and deploy parachutes. Airbrakes can be used (action group number 1
) in case speed is too high.
9) Recover 1st stage and go to the tracking station. Switch to the 2nd stage and continue with circularization.
|
|
10) Release the payload and put 2nd stage in retrograde.
11) Deploy parachutes below 250 m/s.
|
ECO-1 Block 10 Flight Envelope (WIP)
-Payload is set to 3,5 t for now
-Payload must be firmly attatched to avoid control problems
-Never Exceed Speed during reentry: —– m/s (WIP)
-Reentry angle limits: (WIP)
-To achieve stable orbit and recover 1st stage, an apoapsis of 100 km must be achieved.
|
|
A stock rocket called ECO-1 (Jet+Ion) Block 10 (Payload 3,5t). Built with 122 of the finest parts, its root part is fairingSize3.
Built in the VAB in KSP version 1.8.1.
