Paste a url where
can be downloaded
A development of design shared by Kerbal Forum User @Bewing
His design was
not a Kerbin SSTO that can SSTO in Laythe with scientific instruments and crew space for a scientist, intended to take all science from Laythe in a player time efficient maner.
I added a docking port and three FL-T200 worth of LFO and moved the tanks around to bring dry and wet CoM closer;
Set the canard to Pitch only with 28% Authority, a pair of delta Deluxe for Roll was added and the AV-R8 gone to be replaced to a combination of wing stakes and elevon 1 (mostly to improve simmetry);
Landing gears increase in size (ly-35 instead of LY-10) to raise the craft from ground a bit.
Finaly added a service bay with solar panel, monopropelant and moved most science intruments inside)
T0: SAS on hold attitude, full throttle, activate Jet and release brake
T4min:Jet Flameout, turn off jets
T5mins:SAS to follow prograde
T6min30s:apoapsis 75Km, cut throttle, coast to apoapsis
T:11min20s:(30s before the apoapsis) throtle up sligth to ciscularize
Reached 75x75 orbit with 755lf and 80ox (KER says 180m/s)
REENTRY PROFILE(from the orbit above)
Retroburn just after the desert to make the orbit intercept the surface near KSC
Enter the atmosphere with 60° AoA and maintain it until reducing the speed to ~1km/s
Keep rougly 5° above prograde to glide to the runaway
A stock aircraft called B-Wing4ps. Built with 61 of the finest parts, its root part is Mark2Cockpit.
Built in the SPH in KSP version 1.2.2.
- Type: SPH
- Class: ship
- Part Count: 61
- Pure Stock
Do you really want to downvote this?
Don't forget, people build craft at all skill levels, just 'cos something is 'newbish' doesn't mean it needs hatin'.
It will cost you 5 of your own points to downvote