Help::Auto-Download
What's this slidery thing next to the download link?Mod
Parts
Action Groups
Your craft has downloaded
Not sure how to install a craft file?
Here's howPut the craft file you've downloaded into the SPH sub folder in the Ships folder in your save;
<ksp_dir>/saves/<your-save>/Ships/SPH
Put the craft file you've downloaded into the SPH sub folder inside Ships in the root of KSP;
<ksp_dir>/Ships/SPH
The .ckan metapackage for this craft has downloaded.
Give it to the CKAN mod manager to install the mods for you. How to use the .ckan metapackage file | Don't use CKAN? Get it hereBack to Main Craft's Page
Or find other craft; - that use the same mods | that are compatable | with similar mods
Paste a url where
this mod
can be downloaded
Description
A-2BS is the unarmed side of A-2B. It is an airplane designed to be a V/STOL (Vertical / Short Take-Off and Landing). It is capable of vertical take-off and short-range landing.¨1 ° Vertical Engines.¨2nd Main Engine.
A mod aircraft called B.C.L A-2BS. Built with 39 of the finest parts, its root part is quizTechMk2ThunderboltCockpit.
Built in the SPH in KSP version 1.2.2.
UNARMED VERSION!!!
Details
- Type: SPH
- Class: aircraft
- Part Count: 39
- Mods: 6
Mods
- B9 Procedural Wings Modified
- Kerbal Aircraft Expansion
- QuizTechAeroPackContinued
- Squad (stock)
- Stock Extension
- TweakScale - Rescale Everything!
The A-2B and A-2BS can not take off vertically with a heavy load,I recommend using the traditional way.
READ BEFORE DOWNLOADING !!!
How to Swim.
1 Activate SAS, RCS and Brakes.
2 Increase power and press 1 to activate vertical take-off motors.
3 ° When the vehicle leaves the ground collect the landing gear. (From that moment it is necessary to give small touches in the W or S to stabilize the A-2)
4 When the airplane reaches 100 meters, press 2 to activate the main engine.
5 ° When the speed exceeds 25 M / S and the vehicle reaches 130 meters, press 1 to turn off the vertical motors and deactivate the brakes. (It is not necessary to reduce the power).
6 ° Raise the aircraft until the symbol reaches 20 degrees positive on the Navball.
How to land
1 ° Press 2 to deactivate the main motor, when it reaches 200 meters press 1 to activate the vertical motors.
2 When you reach 150 meters, reduce the power by half, activate the landing gear and the brakes.
3 ° From that moment on make reductions or increases of power in a delicate and careful way.
4 ° When touching the ground press 1 to turn off the engines and taxi using the main motor at low power.