KerbalX

- What do you mean they made a faster helicopter?!
- Sir, the BAK-122 is almost 40 m/s faster than the Cre~
- I don’t want to hear this! YOU will build an even faster helicopter… NOW!
- B-but… …alright, how fast it should be?
- Well… at least Mach 0.80…
- HOW F~~
.
Introducing the TH-136 X3, or the Super Crevette! We took the original TH-136J and upgraded it as much as we could. A lot of parts were moved and/or changed in order to improve aerodynamics, but it was still not enough to reach 140 m/s. So, we decided to add more boosters - 2 more Juno engines were placed on the wings, and the landing skids were replaced with retractable landing gear, which reduced the drag even more. The rotor was also slightly upgraded to improve it’s lift, because the helicopter is now heavier than before.

.
The controls are similar to TH-136J - press 1 to activate rotors and fuel cells, 2 to set blade pitch, 3 to deploy or retract ladder, and 0 to turn jet engines on and off. Rotor torque is controlled with H and N.
And again, don’t break the tail! Good luck.

Details

• Type: SPH
• Class: aircraft
• Part Count: 50
• Pure Stock

Flight performance:
Maximum speed: 275+ m/s!
Max G-Force: 17.5+ G

Mods

• Breaking Ground DLC
• Squad (stock)

Description

1 - Startup
2 - Toggle Blade pitch
3 - Toggle Ladder
0 - Jet Engines ON/OFF
H and N - Rotor Torque

A stock aircraft called TH-136 X3 Super Crevette. Built with 50 of the finest parts, its root part is Mark2Cockpit.

Built in the SPH in KSP version 1.7.1.