KerbalX

Description

Extra-Kerbin Vehicle built in 1.2. Design aesthetic inspired by the Jedi Starfighter Hyperspace Engine. Practically designed to taxi compatible vehicles with signature Butt-Port (such as the LMD3 and LORD3) long distances, such as to other planets.
Primary Engines are Atomic. MonoProp Retrograde Engines for easy rendevouzsizesezisez.
Tips:
Can easily dock with the OFS3 but make sure the arrays are retracted on the station or you may rip some of them off.

Launch Instructions

1. Select Booster’s control system for proper launch orientation(The Ex-KV is launched upside-down). Activate first stage at 90% power. Decouple stages as they deplete.
2. When exterior boosters are spent increase power to 100%.
3. Between 25'000m - 30'000m pitch to 45 degrees.
4. When primary booster is spent select Ex-KV Control system (located just behind the cross-bar) and orient to Prograde at 100% power.
5. At Apoapsis orient Ex-KV back to 45 degrees. Leave the heading in place, the Ex-KV will naturally drift towards Radial Out position.
You Have Now Achieved Orbit