KerbalX

Details

• Type: SPH
• Class: aircraft
• Part Count: 26
• Pure Stock
• KSP: 1.10.1

Service plane for all kinds of Kerbin WP missons. (tier 5, partcount < 30)
Powered by 2xWheesley engines, this plane will allow you
to perform any waypoints missions on Kerbin.
Partcount 26 allows you to add some scientific instruments.
.
Range: Kerbinwide on cruise mode.
Cruise mode: speed ~600m/s on altitude 8-12km.
Jump altitude: 22km - with full load, 23km - with half load.
Fuel: 700pts full load. (3.5 tons)

Fuel consumption:
~ 420pts for one lap around the Kerbin (on cruise).
20pts for each takeoff operation.
Stable on Warp x4.
.
High Altitude Waypoint Missions.
To perform the jump, take a position at an altitude of 7-8 km and speed 600m/s face to waypoint. When the distance to WP is reduced to length of branch of current orbit (from craft to impact point) set authority limiter of nose winglets to 1°-2°.
Start pitchup smoothly (use CapsLock) til angle of trajectory reachs 45°.
After that return authority limiter to 9°.
Use the appropriate amount of fuel. Fill tanks proportionally, to keep CoM in the right place.
.
Landing:
Use flaps (AG4).
Approach speed ~50m/s (full load, sea level, flaps on).
Touchdown speed 35-40m/s (full load, sea level, flaps on) .
.
Surface Waypoint Missions / Rover missions.
Riding:
Use additional wheels when you ride surface (AG1).
Do not use LY version (wheels without brakes) for surface missions,
because of most impossible stop the plane to period of time on angled surface.
Use more additional wheels (especially for wings rear ends) if you can, to delay the inevitable end.
Be brave, be careful and God bless you.
Takeoff:
Use flaps (AG4).
Don`t forget to RETRACT additional wheels BEFORE start of takeoff!
.
Underwater Missions.
On the depth 400m plane will die.
.
Watch video for more info.