Super-Heavy Lander - Launch Varient
by RA3236
uploaded 2015-12-15
30 downloads /
1
points
VAB
mod lander

Details

  • Type: VAB
  • Class: lander
  • Part Count: 94
  • Mods: 5

Mods

  • Ferram Aerospace Research
  • Procedural Fairings
  • Procedural Parts
  • SXT - Stock eXTension
  • Squad (stock)

Description

This lander may be heavy, but it packs a lot of RCS fuel and has a very funky boarding ladder. Now comes with a lanch vehicle!!! Can go to Minmus (Don’t trust the Mun)! May be helpful if you read the following:

Launch Procedure:

  1. DO NOT PRESS ‘Z’. Literally T SPACE.

  2. At 50m/s begin gravity turn. Repeatedly tap D so that you are never more than 10 degrees away from prograde.

  3. At 10 km, you should be at 45 degrees from straight up. Don’t turn, full throttle (you may note that this thing has a TWR of 4.5) and when boosters burn out, stage and slowly tilt towards 90 degrees.

  4. When AP reaches 100 km (which will be quick) switch off engine and coast to space. Set up orbital insertion and burn at node. Continue with a transfer to the appropriate moon.

A mod rocket called  Super-Heavy Lander - Launch Varient. Built with 94 of the finest parts along with the stock Super-heavy Lander, its root part is Mark1-2Pod.

Built in the VAB in KSP version 1.0.5.

swipe to switch images, tap to close
K
S
P