KerbalX

Description

The GC-67 is a converted Kerlington Model 26 ‘Littleclipper’ used for military and government transport. The B variant is optimized for small vehicle transportation. This aircraft is very high flying for a prop transport and can climb to 4,000 metres in under 7 minutes with 20 tons of cargo. The service ceiling also allows flight over (non existent) bad weather or turbulent air. Perhaps the most unique feature is the fact that this plane has 2 decks, the upper deck for freight and a low auxillary deck, either fitted with extra fuel tanks or passenger seats (You can travel between these decks by transfering crew to the lower passenger module from the upper one).

Specifications:
- Role: Cargo airplane
- Range: Medium
- Cruising speed: ~100 m/s
- Passengers: Varies with configuration
- Crew: 2
- Cruising altitude: ~4000 m
- Service ceiling: at least 5000 m

Flight instructions:
- Make sure cargo door locked and brakes set
- Set torque anywhere above 8% (i key increases and k key decreases)
- Throttle up to 1/3 until you reach 30 m/s, then throttle up to max
- Rotate at around 80 m/s
- Flies like any other plane (pitch trim availiable, h trims up and n down)

A stock aircraft called GC-67B. Built with 148 of the finest parts, its root part is Tube2.

Built in the SPH in KSP version 1.8.1.

Details

• Type: SPH
• Class: aircraft
• Part Count: 148
• Pure Stock