C4X-1
by Minmus_drive_yards
uploaded 2020-03-04
(updated 2020-03-04)
72 downloads /
9
points
SPH
stock+DLC aircraft
#H-19 #Chickasaw #Heli #Helicopter

Description

A replacment of the C2K in the rescue role, C4X-1 is a small single rotor helicopter which offers no luxuries, but is rather resillient.

Specifications:
- Role: Utility helicopter
- Range: Medium
- Cruising speed: ~35 m/s
- Passengers: 2 to 3
- Crew: 1 to 2
- Cruising altitude: 300 m
- Service ceiling: atleast 500 m

Flight instructions:
- Set throttle to zero, activate brakes, and activate SAS
- Activate AG1 and allow rotor to spin up to 220 RPM
- Slowly advance throttle, around 1/3 should be enough to take off
- In forward flight, the helicopter has a constant roll to the left, I think this is caused by dissymmetry of lift across the rotor disk, and do not currently have a solution, but any suggestions are welcome.
- Sharp turns at low speeds may result in momentary loss of tail rotor effectiveness, but should return to normal flight

A stock aircraft called C4X-1. Built with 47 of the finest parts, its root part is strutCube.

Built in the SPH in KSP version 1.9.1.

Details

  • Type: SPH
  • Class: aircraft
  • Part Count: 47
  • Pure Stock
swipe to switch images, tap to close
K
S
P