KerbalX

Description

A dire need for a larger alternative to the R1X helicopter resulted in Kerlington creating the C2K. This variant is used for VIP transport can carry 2 in a comfy cabin in the rear, along with 2 pilots. The C2K is known by pilots as ‘the mechanical bull’, due to how difficult it can be to stay in control. Nontheless, the helicopter has good range and manuverability but subpar speed. Please read instructions to be able to conduct smooth flight operations.

CRAFT MODERNIZED FOR 1.9

Specifications:
- Role: Utility helicopter
- Range: High (flights of more than 50 km are impractical due to low speed)
- Cruising speed: ~30 m/s (on a good day)
- Passengers: 2
- Crew: 1 to 2
- Cruising altitude: 300 m
- Service ceiling: atleast 500 m

Flight instructions:
- Set throttle to zero and press action group 1 and activate SAS
- When RPM reaches 219-220 and stabilizes, advance throttle to ½ or 2/3
- The helicopter will rapidly lift,
- From this point, it flies like my other helicopters, q and e roll, a and d yaw, and w and s pitch
- When landing, make sure main wheels touch first, or helicopter may tip over

Note: NEVER increase throttle past 2/3, the helicopter will become unstable in most cases when this is done, and will likely result in loss of vehicle and crew

A stock aircraft called C2K-2. Built with 41 of the finest parts, its root part is Mk1FuselageStructural.

Built in the SPH in KSP version 1.9.0.

Details

• Type: SPH
• Class: aircraft
• Part Count: 41
• Pure Stock