Deep Space Relay + Explanation
by McFlyever
uploaded 2018-03-18
(updated 2020-03-23)
825 downloads /
45
points
VAB
stock satellite
#Deep #Space #Relay #Satellite

Create a stable Connection, between Kerbin and Jool / Eeloo

How to Fly

  • Reach an Low Kerbin Orbit at ~75 Km
  • Leave the Kerbin System (prograde) with or without Mun-Swing-By, it´s up to you
  • Burn a (first) Sun Apoapsis to 20.927.502.597,3 m as exact as possible (a bit deviation isn´t problematic). Time warp to this point and
  • Configure the Destination Hight to ~40.000.000.000 m
  • Now you warp to the Apoapsis (3min before) and decouple your first Deep Space SAT (No.1, decouple with staging)
  • Circularize with the Satellite (to 40.000.000.000 m)
  • Warp again to Apoapsis and repeat this Maneuver (two times again, for the both last SAT´s)
  • Finish! You have a Deep Space Relay Network to connect Kerbin with Jool and Eeloo!

All around you need a few years for this, that´s normal ;)

Good Flight, Space Pilot!

Details

  • Type: VAB
  • Class: satellite
  • Part Count: 124
  • Pure Stock
Changelog [1.9.1]
  • no changes
Changelog 1.6.1
  • Added revamped parts
  • new Boosters
  • optimized Transfer Stage

Cheap Rocket for a useful System

Smart packed Transfer Stage

Simple Relay SAT with 1.300 m/s DV

Notes
  • Relay Satellite´s without RCS! Slow down the Engine thrust, for precission maneuvering!
  • Reduce the Thrust of Main Engine during Gravity Turn to reach orbit most efficiently (the adjusted Boosters pushes heavy yet)
  • Control your Orbit, after decouple a SAT. It changes a bit, cause of the decoupling force or something
  • In all Stages a bit Savety Fuel are involved ;-)


swipe to switch images, tap to close
K
S
P