KerbalX

This trailer was designed to be used with my Kerbalbilt Model 738 semi truck. To attach it, simply back the truck under the connector, activate the truck and trailer brakes, raise the landing gear on the trailer so that it drops down onto the back of the truck, and then drive the truck backwards and extend the trailer hitch landing gear on the truck’s rear end to push the trailer into its slot and lock it in place. The rear door is very easy to operate as well. Action group 1 extends the small landing struts on the door to prevent any damage as the door opens. Action group 2 decouples the door, and it swings down. Hit group 1 again to lower the door to to the ground, drive your cargo into the trailer, then hit action group 3 to begin closing the door, then group 4 to fully close it. Deactivate groups 3 and 4, and you’re good to go! If the door hinge tends to fall apart, just attach an octagonal strut to the outer end of the radioisotope generators, and they won’t fall out anymore.

Details

• Type: SPH
• Class: probe
• Part Count: 164
• Pure Stock