KSA-X KLLRV
by KSpaceAcademy
uploaded 2018-05-09
(updated 2018-05-09)
153 downloads /
18
points
SPH
stock+DLC lander
#stock #experimental #replica #krakentech

Description

Board craft with Kerbal by climbing the stepladder. Press 2 to control from VTOL probe core and set SAS to hold Radial Out. ¨¨Throttle up 100% and stage jet engine to take off (jet takes some time to spool).¨¨After climbing to about 200m AGL, right click jet engine and set thrust limiter to 68%. This causes jet to carry about 5/6 of weight (Just like the real LLRV!).¨¨Press 1, immediately set SAS to Heading Hold, turn on RCS, and stage main engines. Throttle up main engines to control descent and roll/pitch/yaw with RCS to control attitude. ¨¨Land at under 3m/s or risk destroying gear! BEst flown at Jebwards AFB (Dessert Runway, thx EJ_SA for nickname)¨¨If you get out of control, press backspace to fire ejection seat! Right click kerbal, exit seat, press P to deploy kerbal parachute!

A stock aircraft called KSA-X KLLRV. Built with 172 of the finest parts, its root part is strutOcto.

Built in the SPH in KSP version 1.4.3.

Details

  • Type: SPH
  • Class: lander
  • Part Count: 172
  • Pure Stock
swipe to switch images, tap to close
K
S
P