Paste a url where
can be downloaded
- Type: SPH
- Class: ship
- Part Count: 634
- Mods: 3
- B9 Aerospace - HX Parts Pack
- B9 Aerospace Parts Pack
- Squad (stock)
She’s big and not for the faint of heart, or computer. measuring at just over 230m in length this ship is a 1/10 rough scale version of the ship from home world.
Intentionally left empty for all of you small craft hauling needs. When fully fueled and at 500 km above Kerbin she packs a whopping 3425+ DV at a 2.84 TWR in Close Cycle mode and 8908 DV at 0.64 TWR in Hybrid Plasma mode.
Ready to launch FROM THE RUNWAY, fly at a 0 to 5 degree launch angle until booster sep, then start a very slow gravity turn heading east until you reach roughly 45 degrees. As you approach an AP of 110-120 km throttle down to 1/3 until you have exited the Atmo. Once outside of atmo engage hybrid mode (hotkey 0) and run full throttle until you are in orbit staying slightly ahead of prograde.
This ship will be practically empty when you reach orbit, but should still have 1000ish DV left, enough to reach your Minmus refueling depot.
Although our engineers have spent a lot of time developing this
colony ship, do make sure you protect this 83,000,000 Kerbuck investment with KJR insurance.
IM_AM_SVEN Engineering is not responsible for the loss of any colonies, vessels, or Kerbals.
A mod Colonyship called Homeworld Mothership. Built with 634 of the finest parts, its root part is mk3FuselageLFO.100 (buried deep in the hanger bay).
Built in the SPH in KSP version 1.1.2.
Do you really want to downvote this?
Don't forget, people build craft at all skill levels, just 'cos something is 'newbish' doesn't mean it needs hatin'.
It will cost you 5 of your own points to downvote