KISS-II Cupola
by Hotel26
uploaded 2022-09-04
| Version 3 of 6
19 downloads /
1
points
VAB
stock station
#KISS

Description

KISS-II is an upgrade of my original Kerbal Interplanetary Space Station that comes with a complete set of Minimus launchers, making it easier for the first-time space station builder to get into orbit. It is also simpler to assemble.

Cupola is the third launch and provides a laboratory, cupola and Mama Dock for visiting spaceplanes.

KISS-II is comprised of the following components, to be launched in sequence:

  1. KISS-II Asterisk
  2. KISS-II Observatory
  3. KISS-II Cupola
  4. KISS-II Orangutan
  5. KISS-II Lab Hab
  6. KISS-II Solar

Note: All launchers are rated for polar orbit.


Deployment:

  • check Resources:Liquid Fuel and pin open the X200-8 and R12 tanks
  • SAS Hold; half throttle; ignition
  • 30 m/s Sfc Pro; pitch down 5 deg; full throttle but reduce to allow the nose to fall toward 45 deg
  • AP 40 coast
  • 35 km full throttle
  • AP 75km coast
  • after 50km jettison fairing
  • after 70km burn toward the horizon but don’t use more than half the X200
  • milk the R12 reserve fuel into the X200 and separate
  • gently apply full power to the Twitches with the nose on the horizon but lift it when necessary to prevent the climb rate going negative
  • after circularization, switch back to the Minimus first stage booster. Turn Sfc Retro and apply the brakes and throw the chutes
  • use any remaining fuel to maneuver for r/v with KISS-II
  • if necessary, send Finch for retrieval
  • when close to KISS-II, separate the Finch, turn Prograde and, ensuring other vehicles are clear!!, then stage the separation of S2 for de-orbiting and recovery

Built in the VAB in KSP version 1.11.2.

swipe to switch images, tap to close
K
S
P