Help::Auto-Download
What's this slidery thing next to the download link?Mod
Parts
Action Groups
Action Group info has not been setYour craft has downloaded
Not sure how to install a craft file?
Here's howPut the craft file you've downloaded into the SPH sub folder in the Ships folder in your save;
<ksp_dir>/saves/<your-save>/Ships/SPH
Put the craft file you've downloaded into the SPH sub folder inside Ships in the root of KSP;
<ksp_dir>/Ships/SPH
Back to Main Craft's Page
Or find other craft; - that are also pure stock
Paste a url where
this mod
can be downloaded
-NO MODS NEEDED-
-Parts will revert to stock colors if you do not have Texture Unlimited Recolor Depot installed.
-What could’ve been.
Proposed as a replacement heavy fighter for Germany’s Messerschmitt Bf 110. The P.75 was to be equipped with 4x 30mm cannons and feature a novel layout: rear-mounted wing, forward mounted canards, and two engines mounted inside its low, wide fuselage to drive concentrically mounted, counter-rotating pusher propellers. Projected top speed was just under 500 miles per hour. It never proceeded beyond wind-tunnel testing despite promising results.
How to fly:
-Use the main throttle to control engine torque.
-Control propeller pitch angle with I/K from between -22 degrees at takeoff to a maximum of -50 degrees increasing gradually until at a top speed of approximately 190m/s.
-To create folding landing gear, it uses parts from Breaking Ground. After take off, press AG 9 to unlock the parts and press G to raise and fold the landing gear. Press G to lower the gear and AG 9 again for landing.
-Because of the method of construction, this craft has very high sensitivity to pitch control. While it is very manageable AG-0 will deploy the trailing edge control surfaces to help recover from tumbling or spinning.
Details
- Type: SPH
- Class: aircraft
- Part Count: 158
- Pure Stock
- KSP: 1.12.3
Manufactured In Manufactorum Kerjakis by TechPriest GillyMonster