Paste a url where
can be downloaded
A stock replica of the Japanese carrier based fighter, the A6M
Zero, Built with a low part count of 68. The stock propeller is used by pressing 2 to decouple the motor, pressing right bracket to switch to the motor, holding alt + E for around 15 seconds, then switching back to the main plane and turning on SAS. It may be helpful to first turn on the parking brake so you don’t take off while spinning up the engine. To shut off the engine for landing, quickly switch to it, turn on SAS, and switch back to the main plane.
Performance is good and very smooth for a stock prop, and the craft is very manuverable. It looses it’s speed quickly in turns and the stock propeller provides relatively little power.
If the propeller won’t turn, try rebuilding the fairing.
Built in the SPH in KSP version 1.3.0.
- Type: SPH
- Class: aircraft
- Part Count: 68
- Pure Stock
Do you really want to downvote this?
Don't forget, people build craft at all skill levels, just 'cos something is 'newbish' doesn't mean it needs hatin'.
It will cost you 5 of your own points to downvote