Fuel Ring Kit
by CrashTestDanny
uploaded 2016-05-08
stock station
#Fuel-Depot #Station #Stock #Huge


It all started simply enough. Let’s build a Station that is not only rigid, but holds huge quantities of fuel and is still all Stock! Of course, it’s been tried before and a couple of our more negative colleagues just had to dwell on past failures, but we pressed on. We put something together in the VAB, but getting something like this on orbit is a bit tougher than mocking it up in the VAB, as you well know. So we began work on how to get this behemoth to 80km. Many Launch vehicle prototypes were created, some results were entertaining and some were more like catastrophic. One thing that could be guaranteed with this much drag is that a single launch would almost certainly flip, and flip they did. In the end, two launch vehicles were successful, and both flipped before reaching orbit!

This craft file includes the kit version with its simplified Launcher. Though not required, use of GPOSpeedFuelPump is highly encourage to make sure lower tanks burn first and keep the CoM high. When the launcher decides to flip, cut the engines when pitch falls below 0 or increases above 90. Reignite ASAP When she comes back around between 0 and 90.

Assembly is a breeze. There are four types of connectors. The hub starts and stays in the center. On each of its 6 radial ports, there is an assembly consisting of one spoke (with two ore tanks), one ring segment (just a tank with two end ports), and one vertex. You will also find two RCS tugs attached to the bottom of the hub.

For each assembly, you will want to use tug 1 to detach the ring segment and park it out of the way. Then attach tug 2 to the vertex port opposite the hub and pull the vertex and spoke away from the hub. Attach the free end of the spoke to the hub port just vacated. Immediately detach the vertex from the spoke and attach the port opposite the tug to the free end of the spoke. Detach the tug and park it. Attach the ring segment to the port adjacent the recently attached spoke. Detach the tug immediately. Repeat until the last assemble. For the last assembly, attach the vertex last - spoke and ring can go in either order.

A stock Space Station called Fuel Ring Kit. Built with 376 of the finest parts, its root part is dockingPortLarge.

Built in the VAB in KSP version 1.1.2.


  • Type: VAB
  • Class: station
  • Part Count: 376
  • Pure Stock
swipe to switch images, tap to close