77I- EJ_SA class carrier v0.79
by Azimech
uploaded 2016-09-30
(updated 2016-11-03)
stock base
#Flying #Driving #Aircraft #Carrier #Mining

Updated from 0.76 to version 0.79! Changelog will come later (when I remember what I did).

Changelog 0.76:

Compared to 0.61, to following has changed.

  • Removed the loading ramp and gave it a proper stern.

  • Increased the size of the flight deck: 10m. longer 4m. wider.

  • Placed the conning tower a few meters to the rear and right.

  • Added some crew modules in the hangar deck.

  • Increased the size of the hangar deck, it’s estimated 7 jets will fit in there now.

  • Completely changed the elevator, less parts, more functionality, easier in operation, more reliable.

  • Removed a lot of struts and autostruts.

  • Part count has grown from 570 to 575.

Instructions for using the elevator.
  • Operating the elevator is prohibited when the carrier is moving. Warranty is void when doing so.

  • The standard and safe position is the flight deck. After operation, always return it there before moving the carrier or leaving the scene.

  • To lower the elevator, enable the thrusters, use action group 9. Throttle up to 25%, then undock the elevator platform with the two docking ports. Switch focus to the elevator and engage SAS. Slowly reduce throttle until the elevator starts to sink.

  • There’s no docking port for the elevator at the hangar deck. To raise the elevator platform, ensure SAS is still enabled, then slowly raise throttle until the elevator starts to rise, then reduce throttle a bit to reduce the speed.

  • Make sure every time you decouple the elevator platform SAS is enabled.

A stock aircraft carrier called 77I- EJ_SA class carrier v0.79. Built with 609 of the finest parts, its root part is mk3FuselageLF.100.

Built in the SPH in KSP version 1.2.1.


  • Type: SPH
  • Class: base
  • Part Count: 609
  • Pure Stock
swipe to switch images, tap to close