77I- Azi19 Jolly Jinn
by Azimech
uploaded 2016-11-19
(updated 2016-11-19)
stock aircraft

Not fast nor powerful but easy to fly. I made this as a flying testbed therefore the airframe isn’t as detailed or polished as usual. Engine doesn’t like speeds higher than 35rad/s, vibrations increase with speed until it fails so adjust prop pitch when needed.
As always, it flies with standard drag but that’s boring. With adjusted drag the top speed is 135m/s at sea level.
This engine needs cooling! Before decoupling the shaft, press action group 1 once to activate the turbine shaft radiators.

Built in the SPH in KSP version 1.2.1.


Instructions for take off:

  1. Press AG 1 to activate the engine cooling (engine will fail within 5 minutes without it.)

  2. Stage, it will decouple the shaft and start the blowers.

  3. Switch on SAS.

  4. Full throttle.

  5. Wait. It will take off by itself.

  6. Check engine speed, adjust prop pitch as needed.


  • Type: SPH
  • Class: aircraft
  • Part Count: 130
  • Pure Stock
swipe to switch images, tap to close